-
101 145 тг.
Точка доступа Ruijie RG-AP840-I
Точка доступа RUIJIE RG-AP840-I WiFi 6 (MIMO 2.4G-2x2 400Mbps; 5G-4x4 4.8Gbps\ 1024 client\ 3x1GbE\ FAT/FIT/MACC mode)
Характеристики Ruijie RG-AP840-I
| Model | RG-AP840-I | |
| Hardware specifications | ||
| Radio | Dual-radio dual-band： Radio 1: 2.4G 11n: 2×2 MIMO Radio 2: 5G 11ax: 4x4 MIMO |
|
| Protocol | Supports standard 802.11ax, dual-radio dual-band, concurrent 802.11ax and 802.11a/b/g/n/ac | |
| Operating Bands | 802.11b/g/n ：2.4G ~ 2.483GHz 802.11a/n/ac/ax ： 5.150～5.350GHz，5.47～5.725GHz，5.725～5.850GHz (vary depending on different countries) |
|
| Spatial Streams | Up to 6: 2×2:2 in 2.4GHz , 4×4:4 in 5GHz | |
| Max Throughput | Maximum throughput of 2.4G: 400Mbps Maximum throughput of 5G: 4.8Gbps Maximum throughput per AP: 5.2Gbps |
|
| Modulation | OFDM：BPSK@6/9Mbps，QPSK@12/18Mbps，16-QAM@24Mbps，64-QAM@48/54Mbps DSSS：DBPSK@1Mbps，DQPSK@2Mbps，and CCK@5.5/11Mbps MIMO-OFDM：BPSK, QPSK, 16QAM, 64QAM, 256QAM and 1024QAM OFDMA (up to 1024-QAM) |
|
| Receiver Sensitivity | 11b：-96dBm（1Mbps），-93dBm（5Mbps），-89dBm（11Mbps） 11a/g：-91dBm（6Mbps），-85dBm（24Mbps），-80dBm（36Mbps），-74dBm（54Mbps） 11n：-90dBm（MCS0），-70dBm（MCS7），-89dBm（MCS8），-68dBm（MCS15） 11ac HT20：-88dBm（MCS0）, -63dBm（MCS9） 11ac HT40：-85dBm（MCS0）, -60dBm（MCS9） 11ac HT80：-82dBm（MCS0）, -57dBm（MCS9） 11ax HT80：-82dBm（MCS0）, -57dBm（MCS9）, -52dBm（MCS11） 11ax HT160：-80dBm（MCS0）, -49dBm（MCS11） |
|
| Antenna | Integrated antenna design | |
| Antenna Gain | 2.4G: 3dBi 5G: 3dBi |
|
| Service Ports | 3 10/100/1000M Ethernet ports (The LAN1 Port supports PoE in, LAN3 Port supports LAN & IoT module expansion with PoE out) | |
| Management Port | 1 console port | |
| USB | 1 USB 2.0 port | |
| IoT Capability | BLE | |
| Reset Button | Support | |
| Anti-theft Lock | Support | |
| LED Indicator | 1 LED indicator (Supports red, green, blue, orange and flashing mode, which indicates device access. The indicator can be switched off to silent mode.) | |
| Transmit Power | ≤100mw（20dBm） (vary depending on different countries) | |
| Adjustable Power | 1dBm | |
| Power Supply | Local power supply (DC 48V/1A) (DC Power adapters should be purchased from third-party vendors separately if needed.) PoE+ (802.3at) PoE (802.3af) – Not recommended: 5G radio is degraded to 2x2 MIMO, and the PoE out of the LAN3/ IoT port is disabled |
|
| Power Consumption | ＜25.4W | |
| Physical Specifications | ||
| Temperature | Operating Temperature: -10°C to 50°C | |
| Storage Temperature: -40°C to 70°C | ||
| Humidity | Operating Humidity: 5% to 95% (non-condensing) | |
| Storage Humidity: 5% to 95% (non-condensing) | ||
| Installation Mode | Ceiling/wall-mountable | |
| Dimensions (W x D x H) | 220mm ×220mm x48.85mm（Height of the AP only, excluding the mount kit） | |
| Weight | 1.30kg | |
| MTBF | 250,000 hours | |
| Certifications and Compliance | ||
| Safety Standard | GB4943, EN/IEC 60950-1 | |
| EMC Standard | GB9254, EN301 489 EN 55032 , EN 61000, EN 55035 |
|
| Health Standard | EN 62311 | |
| Radio Standard | SRRC, EN300 328, EN301 893 | |
| Software Specifications | ||
| WLAN | Maximum clients per AP | 1024 (Recommended Clients: 64) |
| BSSID capacity | Up to 32 | |
| SSID hiding | Support | |
| 5G Priority (Band Steering) | Support | |
| Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID | Support | |
| Remote Intelligent Perception Technology (RIPT) | Support | |
| Intelligent device recognition technology | Support | |
| Intelligent load balancing based on the number of users or traffic | Support | |
| STA control | SSID/radio-based | |
| Bandwidth control | STA/SSID/AP-based bandwidth control | |
| Data encryption | WPA（TKIP）, WPA-PSK, WPA2（AES）, WPA3, WEP（64/128 bits） | |
| PSK and web authentication | Support | |
| PPSK authentication (For Employee) | Support (require wireless controller) | |
| 802.1x authentication | Support | |
| PEAP authentication | Support | |
| Data frame filtering | Whitelist, static/dynamic blacklist | |
| User isolation | Support | |
| Rogue AP detection and countermeasure | Support | |
| Dynamic ACL assignment | Support | |
| RADIUS | Support | |
| CPU Protection Policy (CPP) | Support | |
| Network Foundation Protection Policy (NFPP) | Support | |
| IP | IPv4 and IPv6 address | Support |
| Multicast routing | Multicast to unicast conversion | |
| DHCP service | DHCP Snooping, Option 82, Server, Client | |
| Management and Maintenance | Supported wireless LAN controllers | Ruijie WS Series Wireless Controller Ruijie MACC-Base Software Controller Ruijie Cloud (Public Cloud) |
| Management protocol | Telnet, SSH, TFTP, Web | |
| Wireless Intelligent AI Optimization Service (WIS) | Support | |
| SNMP | SNMPV1,V2c,V3 | |
| Syslog / Debug | Support | |
| FAT/FIT/MACC mode switching | Factory default firmware supports FAT (standalone) or FIT mode (WS controller) or MACC mode (Ruijie MACC-Base or Ruijie Cloud) management | |
Купить Точка доступа Ruijie RG-AP840-I по выгодной цене с доставкой в Алматы - Официальная гарантия - отправка во все регионы Казахстана - Большой выбор сетевого оборудования на складе в Алматы - Компьютерная и Офисная техника
| Характеристики | |
| Дополнительно | POE вход |
| Порты и разъемы | LAN x3 |
| Скорость беспроводного соединения | 5200 Мбит/с |
| Тип | Точка доступа |
| Цвет | Белый |
Точка доступа Ruijie RG-AP840-I
- Производитель: Ruijie
- Код товара: RG-AP840-I
- Доступность: Наличие уточняйте
-
101 145 тг.
Описания и изображения товаров получены из открытых источников, носят ознакомительный характер и могут содержать неверную информацию и ошибки.
Рекомендуем все модели проверять на официальном сайте производителя.
Теги: Точка доступа Ruijie